10 Unique DIY Shoe Rack Plans - New Balance Shoes Review
Blog

10 Unique DIY Shoe Rack Plans

Sneakers, high heels, boots, and flat shoes are scattered around the entryway and mudroom. And they are increasing, creating a veritable mountain in your house. And, yeah, that’s what I’m talking about the clutter. Do you love being stylish, but loathe the mess? Well, today is your lucky day because In this post I gonna write about 10 creative diy shoe rack plans that will revamp your shoe storage like a charm.

1. DIY PVC Pipe Shoe Storage

They might not the best and most beautiful shoe storage you’ve ever seen, but it may be something that you need to get rid of clutter as well as saving more bucks and time.

All you need to do is getting a few PVC pipes from a hardware store near you. It would be better if you have them cut in the store.

If you are wondering how long the cuts would be, you just need to measure the longest shoe and make the cut a few inches longer so they will fit perfectly.

Cutting the pipes and assemble them using glue for pipes.

After glue them all together, clamp them using clothes pegs. They’re quite sturdy despite the look. You can put the shoe rack on a floor.

Hang Your High Heels

How many high heels do you have? 10? 20? 30? Or maybe more? I know they’re pretty, and they can complement your OOTD for sure. For that reason, move your gazetoward awkward space on your bedroom’s corner. You can follow this idea.

First, you’re going to need tension rods, 1” masking tape, tape measure and level.

Make sure the spaces between each rod allows you to hang your high heels. to do this, measure the space using tape measure. Lastly, to protect your wall from scuffing, you can use masking tape.

Floating Copper Shoe Rack

A small house or apartment requires you to tap into the space effectively including the corner between two walls. If you are looking for a simple idea to use up an unwieldy space, give this shoe rack a shot.

To make this rack, you need floor flanges, copper fittings, 90-degree angle adaptor, T adaptor, copper pipes and wall anchors. You’re going to like the copper finish as it adds the touch of industrial look to your room, make your interior’s more elegant.

Easy Wooden Shoe Rack

To make this rack, you’re going to need 8’ 1”x2” sheets, 36”7/8” craft dowels, and 1 ¼” wood screws.

Tip: It’s always good to have a few extras. First of all, cut your 8’ 1”x2” into two 26” lengths and two 12” lengths.

Cut the dowels into six 12” lengths and six 18” lengths.

You might need to remove any splinters remaining from the cuts by hitting them with sandpaper.

Begin to mark six spots for your dowels on the 26” pieces.

Once you’ve done, drill into the pieces to attach the dowels.

After assembling the other boards, you can attach the dowels to the boards. To make it sturdier, you can screw them.

Rustic and Portable Shoe Rack

To make this shoe rack, you’re going need an old dresser drawer, obviously, four swivel casters, two galvanized iron flanges as the handles, 90-degree galvanized elbow and galvanized pipe.

Besides storing shoes, this portable rack can also be used to store other stuff like gardening equipment and mini plant pots. Also, it will be a nice mobile house for your favorite flower plant at porch that you raise since it was a baby.

Affordable Shoe Rack

Do you have unused cardboards in your storage room? Because you’re going to turn those cardboards into a shoe rack. To make this shoe rack you would need to follow these steps below:

Cut the piece of the cardboards to the size you need.

Score it into 3 and make sure they are equal in size.

Next, use your basic crafting skill to make a triangular tube out of them.

Secure it using duct tape.

Repeat these steps as you need and lastly connect the units.

DIY Grid Shoe Storage Display

This DIY project may be the easiest one in this list since you won’t need a hammer, drill, screw, or any your carpentry skills.

You only need to get wire mesh from the hardware store near you and simply lean it back against the wall.

And, complete! You can hang your high heels there. Easy, isn’t it?

Repurposing Old Jeans

Storing shoes in an over-the-door shoe bag is a mainstream Let’s try to do something new this time.

Let’s upgrade the challenge. Instead of purchasing those plastic bags, let’s scraps your old or undersize jeans?

All you need to is simply making some cuts to your trousers and sew the bottom parts of each cut to secure it from worn out.

Lastly, get a cloth hanger to hang it behind the door and done.

Built-in Shoe Storage

This idea is unique and that’s means it will demand your carpentry skill, planning, and budgeting.

With this built-in shoe rack, you won’t find any bulky drawers that take up valuable space of your home anymore.

Basically, the steps of making these drawersare just the same as making the ubiquitous ones.

You need to make some space inside your wall to place them which requires extensive work.

DIY Hexagon Shoe Rack

These bee-hives-like shoe racks are unique.

They will fit your closet and adorn it.

To make these racks, you need to get 1 x10, wood glue, finishing nails, wood stain.

So that’s all my 10 creative diy shoe rack plans for your shoe storage.

Leave a Comment